Dodge Caliber Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hey guys, long story relatively short, My factory cd player in my 2009 Dodge Caliber went out, so I decided to go and buy a cheap radio w/ Bluetooth
for the time being, I bought a wire harness adapter and an antenna adapter which were both needed to hook up this radio, I double-checked my connections (from harness adapter to car)
and all seems good, however, my radio won't even turn on, it is receiving no power, I checked fuses (In radio and In-car) both are good, I, however, had a spare red wire that came with the head unit,
I've been reading everything from an accessory wire to ignition wire, I'm confused on what to hook this up too if anything? As stated before, all the wires are hooked up correctly and there is no red or any wires for that matter coming from the car that this red wire can be hooked up to? But I have no power so I'm thinking this needs to be hooked up somewhere?

16727
 

·
Super Moderator
Joined
·
12,107 Posts
Crutchfield CANBUS adapter required.
 
1 - 2 of 2 Posts
Top