Dodge Caliber Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
My 07 caliber se 2.0l is a crank but no start its not a fuel issue. It 2 codes p0010 and p0013 for the intake and exhaust cam actuator circuits. If any one could help me find a good wiring schematic with pin outs so it trouble shoot the wiring it would awesome and greatly appreciated. Was able to find ohms specs for the solenoids 6-8ohms both are at 7.5 ohms. Fuse #26 that protects this circuit is good also.
 
1 - 2 of 2 Posts
Top