Dodge Caliber Forum banner
1 - 1 of 1 Posts

·
Registered
2007 Dodge Caliber R/T AWD
Joined
·
66 Posts
From Service Manual - Pg. 8L-77

ALL RIGHT SIDE AND/OR ALL LEFT SIDE TURN SIGNAL LAMPS DO NOT FLASH​
1. Ineffective switch.
2. Ineffective feed circuit.
3. Ineffective CCN inputs or outputs.
4. Ineffective TIPM inputs or outputs.
1. Test and replace left multi-function switch or SCCM as required.
2. Test and repair open right or left turn signal feed circuit as required.
3. Use a diagnostic scan tool to test the CCN inputs and outputs as required. Refer to the appropriate diagnostic information.
4. Use a diagnostic scan tool to test the TIPM inputs and outputs as required. Refer to the appropriate diagnostic information.

First and foremost, try replacing the bulbs first before following steps from the service manual.
 
1 - 1 of 1 Posts
Top