Front motor mount
1 - 6 of 6 Posts
Joined
·
733 Posts
Found this:
www.srtforums.com
80-85 ft.
Torque specs for motor mounts
Can someone tell me what the torque specs are for all of the bolts needed to do upper and lower motor mounts. These are bolts i would really like to have at spec. I know there are a couple who have done them.
www.srtforums.com
80-85 ft.
Joined
·
12,706 Posts
9 - 1622 ENGINE 2.0L
INSTALLATION
1. Install mount.
2. Install mount to frame rail bolts and torque to 28N·m (250 in. lbs.).
3. Install left mount bracket (4).
4. Install mount to transaxle bolts (5) and torque to 68 N·m (50 ft.lbs.).
5. Install mount through bolt (3) and torque to 115N·m (85 ft.lbs.).
INSTALLATION
1. Install mount.
2. Install mount to frame rail bolts and torque to 28N·m (250 in. lbs.).
3. Install left mount bracket (4).
4. Install mount to transaxle bolts (5) and torque to 68 N·m (50 ft.lbs.).
5. Install mount through bolt (3) and torque to 115N·m (85 ft.lbs.).
That's what, I did . Thanks Aleks & 672aq .
apricated the respond.
I'm getting ready to sell my Caliber, going to miss all you guys that keep this forum going helping Dodge Calibers stay alive, this forum has been very helpful .Almost finish with my 1966 California look VW working on lowering front end 4 inches and finishing installing the turbo on high performance 2500cc engine to blow some muscle cars offline with ease I'm ruining about 350 horsepower on a very light bug weighting under 1250 pounds. Anyway wife said only one toy so Caliber has to GO! hopefully to a good home! if your interested in one owner immaculate Dodge Caliber with 80s thousand miles let me know, I can send you a lot more pictures just give a good offer .I'm in Austin, TX.
![Car Wheel Tire Vehicle Hood]()
![Car Tire Vehicle Hood Wheel]()
![Automotive parking light Tire Window Wheel Car]()
![Tire Wheel Car Vehicle Land vehicle]()
![Wheel Car Tire Vehicle Land vehicle]()
![Automotive parking light Car Tire Wheel Vehicle]()
![Automotive tire Automotive lighting Hood Motor vehicle Automotive design]()
apricated the respond.
I'm getting ready to sell my Caliber, going to miss all you guys that keep this forum going helping Dodge Calibers stay alive, this forum has been very helpful .Almost finish with my 1966 California look VW working on lowering front end 4 inches and finishing installing the turbo on high performance 2500cc engine to blow some muscle cars offline with ease I'm ruining about 350 horsepower on a very light bug weighting under 1250 pounds. Anyway wife said only one toy so Caliber has to GO! hopefully to a good home! if your interested in one owner immaculate Dodge Caliber with 80s thousand miles let me know, I can send you a lot more pictures just give a good offer .I'm in Austin, TX.
1 - 6 of 6 Posts
