Dodge Caliber Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Dodge Caliber Mechanical Problems and Questions
    I'm new to the forum, but I've had my Caliber since 2009. I bought it used and am replacing the front struts which have leaked to empty. I'm replacing the struts with the KYB struts, but I'm running into an issue of finding the dust cover/bumper and bellow. I bought the KYB cover but it...
  2. Dodge Caliber Chassis, Suspension, Wheels, Tires
    Hello Everyone! My 07 SXT has reached the 75,000 mile mark and the OEM suspension is suffering. With a slight jerk of the steering wheel the body rolls for 3 seconds! The solution should be easy enough - Replace the struts and springs. I expect I will lower the car 1" or so as this is a daily...
  3. Dodge Caliber Chassis, Suspension, Wheels, Tires
    just had both front struts replace at 38,800 miles on my 07 AWD under warranty thank god. i was getting a hiss sound over bumps and it was feeling loose riding down the road, and had the front brakes done. all is good now!
  4. Dodge Caliber Mechanical Problems and Questions
    I don't know if it's always been that way but looking at my car last night I noticed that the rear Driver's side is at least .5" lower than the Passenger side. The ground to wheel arch on the driver's side is maybe 29.5" but on the passenger side the ground to wheel arch is over 30" I checked...
  5. Dodge Caliber Mechanical Problems and Questions
    So I took my 08 to the shop to have it looked at.. Everytime i would start to brake it would make a loud weird sound (hard to explain) Only happens when I brake.. Took it to shop and they said the Struts were bad (the passenger side) strut was full of grease/oil and he said that was the...
  6. Dodge Caliber Chassis, Suspension, Wheels, Tires
    Put new tires on and found both front struts leaking. Gotta replace 'em. I'm gonna do it myself - it looks fairly straight forward and I have a fair amount of automotive experience. Just wanting to ask you guys if you know of anywhere to get the struts for less than $80 a side. I've looked and...
  7. Performance DIY
    Mopar Performance Stabilizer Bar System and Lowering Spring Kit This installation was pretty extensive and gets you pretty deep into your Caliber. The Stabilizer Bar System (P5153749) was purchased through Mopar Super Center for $350. The Performance Springs (P5153251) were purchased through...
1-7 of 7 Results
Top