Dodge Caliber Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Dodge Caliber Electrical Problems and Questions
    I have a 2010 Sxt, 300000km only had her for about 3 months and there was lots of problems the first month but I cleaned off battery connectors, got a new battery, changed out the alternator and did a tipm reset. she seemed to be fine after that, we were driving around for about a month with...
  2. South West
    Hi all, Been having power issues for a couple months and every time it’s p0700, which doesn’t tell you anything specific. The biggest issue I have and when it pops up is while reversing, which was the first time it happened, all power just cut off everywhere. Second time I was pulling onto a...
  3. Dodge Caliber Mechanical Problems and Questions
    2008 Dodge Caliber SE 2.0L Jatco JF011E My Caliber has been making a whining noise for a long time upon any amount of acceleration or decelerations. I am a broke college student so I opted to hope for the best, I squeezed roughly 30,000 miles out of the transmission and multiple long distance...
  4. Dodge Caliber Mechanical Problems and Questions
    I have an 2007 sxt. Last night I went to go somewhere and my car would not accelerate past 2000 rpms. I took it to autozone and the codes P0700 and P0602 came up. When the car is in park or neutral it accelerates normally. I already unplugged my battery to reset anything and that didn't work.
  5. Dodge Caliber General Discussion
    Hello! I have a dodge caliber 2007. Am having issues, there was few codes on the caliber, so i erase them and rescan few times. It stays with 2 codes. P0700 and u0101. The thing is that as soon as i start the car the temp oil light and gear blinks. Heres a video link. https://youtu.be/DWd7fHIbrnc
  6. Dodge Caliber Mechanical Problems and Questions
    I have a 2009 caliber se with 44,242 miles it just started giving me trouble yesterday i went to drive it after I bought a coffee and five min after it stalled out while I was driving then when I went to start it back up it took two times to start at first it didn't even crank then it just...
  7. Dodge Caliber Mechanical Problems and Questions
    I have a 2008 Dodge Caliber SE which no longer has a warranty on the car. I have a canOBD2 Code Reader and received the followiing codes: Pending Codes: P0777 - Pressure Control Solenoid B Stuck On MIL DTC: P0777 - Pressure Control Solenoid B Stuck On P0700 - Transmission Control System (MIL...
  8. Dodge Caliber Mechanical Problems and Questions
    My 2007 Caliber with 40,000 miles just started having CEL. Took it to Autozone, they found these two codes, P0700 (Transaxle Control System fault) and P0571 (brake switch 1 performance). My son drives the car and he said he noticed that the acceleration (from 0 to 60) is not very good. I am...
1-8 of 8 Results
Top