Dodge Caliber Forum banner

install

  1. Dodge Caliber Interior Mods, Audio, Video
    Hey Caliber owners, I'm looking into some racing seats on ebay with universal sliders. My question is: Can I use the stock seat brackets on my new racing seats? And if so, how can I go about doing it? Any customization or tweaking needed? Replies are helpful! Thanks.
  2. Dodge Caliber Interior Mods, Audio, Video
    Hey guys, Its about that time that I upgrade my door speakers. I have 2 12in subs external so bass isn't THAT much of a factor but I would like a little boost from the upgrades. I really just want crisp sound and clarity. But here is the thing.. I am going to stay with my stock radio that comes...
  3. Dodge Caliber Electrical Problems and Questions
    I plan on getting some LED lights soon. I was woundering what is the easiest way to install them(directly from battery OR piggy backing a fuse) Below is a link to the LED lights AND the instructing http://www.ledunderbody.com/Orange-4pc-LEDGlow-LED-Interior-Lights-Lighting-Kit.aspx...
  4. Dodge Caliber Interior, Exterior Lighting
    In about a week I will be installing a set of halo rings I bought from AAC. I haven't done much in the way of headlight modifications, but I do a bit of fab work at my job. I'm just wondering if anyone has any advice, warnings, tips, whatever before I get started on the install.
  5. Lighting DIY
    hi guys, here's a vid i found on youtube i thought might come in use for somebody who was thinking of installing new headlights. don't know if someone else posted this already, havn't been around in awhile, was movin house so i was kept busy lol! anyway back now:wavey...
  6. Lighting DIY
    Ok so I am planning on installing some emergency lights on the ride for work since I sometimes shoot radar from an unmarked car I didn't want a bunch of toggle switches mounted everywhere so I opted this route. Step one rip the console apart for wire routing Step 2 remove said console for work...
  7. Dodge Caliber Exterior Mods - Body Mods, Body Kits
    Hi. I think someone may have posted this up earlier, but i never came across the thread. I recently purchased a Tryp Grille on ebay. Can anybody direct me as to how to install it from start to finish? And do i need to get my hands on a power drill for this installation? Any help is greatly...
  8. Dodge Caliber Performance Mods - Engine - SXT, SE
    I just purchased a FLOWTECH Glass Pack for my car, Im under the assumption that I have to remove the stock muffler.. (OF COURSE) and apply this replacement, could I just use a clamp or does this have to be professionally installed.
  9. Dodge Caliber Performance Mods - Engine - SXT, SE
    So i have a 07 SE plus, and I want to install a K&N Intake, not really sure how to go about doing this job. I'm assuming its a simple disconnect something, and add the intake.
  10. Dodge Caliber Interior Mods, Audio, Video
    Just purchased a BOSS BV977 in dash for the whip. It came with the wire harness for the unit and all that jazz. Where can I buy a after market wire harness to hook it up, thats compatible with the caliber.:Hey...
  11. Dodge Caliber Interior Mods, Audio, Video
    Just purchased a set of component speakers, usual set up (2) speakers, (2) tweeters, (2) crossovers. I have a cali SE 2007. 1. How do you take off the door panel, [[if needed]] 2. How do I wire it up to the system. :Hey::Hey::Hey::Hey::Hey::Hey::Hey:
  12. Dodge Caliber Interior Mods, Audio, Video
    I have a stock system at the moment, ordered a sub/amp/box/wiring...I want to add some tweeters to the mix. Im piloting a 2007 Caliber SE, so it doesnt come with any speakers besides the stock 4 (6x9). SOOO LET ER RIP, ALL INPUT WELCOME.:Hey::Hey::Hey:
  13. Dodge Caliber Interior Mods, Audio, Video
    JBL 12" SUBWOOFER (MAX OUTPUT 1200 WATTS) PORTED ENCLOSURE (SINGLE) Now to my questions and concerns. 1. I want to mount the amplifier under the passenger seat, I have my mind set on grounding it somewhere near the spare tire underneath the cargo area. 2. Sub-woofer is going to be in the...
  14. Dodge Caliber Interior Mods, Audio, Video
    So my fellow CALIBER-...lol, I'm embarking on transforming my stock din radio to a 7" double din dvd player. I'm not a novice to electrical a/v work. My question is, once I remove the stock bezel and radio, will I just be able to swap in the stereo. Of course changing the harness and mounting...
  15. Car Audio/Video DIY
    I installed new 6x9's in the front door today and wanted to post my steps on the install. I know that other members have posted their installs, but I wanted to show how I did the wiring. I first did a search on the forums to find out which wires were negative, and which were positive in the...
  16. Dodge Caliber Interior, Exterior Lighting
    I purchased a caliber about two years ago. I want to add some fog lights to the mix, its a stock set up so i'm going for a universal kit and run the wires through the firewall. Any suggestions :Hey:
  17. Dodge Caliber Performance Mods - Engine - SXT, SE
    So I'm about to buy a header for my SXT, and I was wondering if anyone has ever installed one on their own??? Or maybe at least know the basics. I have a mechanic friend who's willing to give me a hand, but I want to make sure it's done right! Apart from the header, do I need anything else...
  18. Car Audio/Video DIY
    Theory: When I first started researching what options I wanted in my CSRT-4, I decided early on that I wanted a MyGig/Uconnect Studio. I have 200gig of mp3 music on my home computer and haven't hardly used cd's in 6 years; I just buy them and rip them. I had a 20gig Phatbox in my Jetta and an...
  19. Lighting DIY
    INSTALLATION OF LIGHTED WINDOW SWITCHES FOR THE DODGE CALIBER. Part 1 By Darren Grantham aka. Raven Ghostwolf The switches I used are for a 2007 Dodge Charger you will need; 1 drivers door switch P/N 04602780AA. List price I paid $39.75. 3 rear passenger door switches P/N 04602787AA. List...
  20. Car Audio/Video DIY
    This is my 1st post. I thought I would share with you guys some pics of my Kenwood DDX7015 double din install. I started yesterday. The pics are of what was completed in 1 day. I have to do some final touchups tomorrow. I will post pics of the final pics with them installed. I will be installing...
Top