Dodge Caliber Forum banner

dodge

  1. Timing Marks Dodge Caliber CRD 2.0L

    Dodge Caliber Diesel
    Hi, i have recently just did a water pump replacement on my dodge caliber as the old one completely seized up on me, and to do it you needed to undo tension on the timing belt to be able to get the water pump out, and when i got everything back together and took it for a drive everything was...
  2. Can You Help Identify This Noise?

    Dodge Caliber Mechanical Problems and Questions
    Can You Help Identify This Noise? SOLVED! ----------------------------------------------------------------------------- SOLVED! Front motor mount bolt was loose. Noise GONE!!!! ----------------------------------------------------------------------------- 2007 Dodge Caliber SE 2.0L Posting...
  3. Extended Warranty Transfer?

    Dodge Caliber Mechanical Problems and Questions
    I've been dealing with the water problems that have plagued a large number of the caliber owner community since purchasing my caliber from my mother, who also was dealing with water leak issues. She had an extended warranty through dodge that still is good since I am under 100,000 miles and I...
  4. Dodge 1 Headlight out - Possable Quick Fix question... Comments appreciated !! Maybe a Fast Fit !

    Dodge Caliber General Discussion
    Helloo My friebds TIMP is bad.. only 1 low beam but both 2 high beams work! What if I take a short pigtail harness, so I won't have to cut into the oem wiring.. and just swap the High Beam and Low Beam wires in the pig tail. Then when I put on the high beams in the truck I have 2 working LOW...
  5. First Post! Hi everyone! Here's Ruby!

    New Member Introductions
    First post on the forum! I've seen a ton of nice cars here! Hope to keep going and upgrading!:cool: Still have a lot to do on my plate! But here's what she looks like at the moment.
  6. Spark Plug Gap

    Dodge Caliber Mechanical Problems and Questions
    Excuse the newbie here, but I have a quick question trying to understand the gap requirements when installing Bosch Platinum +4's. I've read around all the related threads and this question has never directly been asked. The gap spec is labeled as between .048" and .053" in the manual for the...
  7. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

    On the road through the central North Island of NZ.
  8. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

  9. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT, Export Model with Right Hand Drive based in Hamilton New Zealand
  10. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT, Export Model with Right Hand Drive based in Hamilton New Zealand
  11. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT, Export Model with Right Hand Drive based in Hamilton New Zealand
  12. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT, Export Model with Right Hand Drive based in Hamilton New Zealand
  13. 2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT RH Drive.

    2011 Dodge Caliber SXT, Export Model with Right Hand Drive based in Hamilton New Zealand..
  14. Checking in!

    New Member Introductions
    Hello Everybody! My name is Lindsey and I have recently become an owner of a 2010 Dodge Caliber SXT. I'm looking forward into modding my car. I am very new to this but have tons of ideas. Good to know there's a whole lotta caliber lovers out there :D
  15. 2007 Caliber transmission overheating......

    Dodge Caliber Mechanical Problems and Questions
    Hey everyone, I have an 07 Caiber and seem to be having what appears to be an all too common problem with the transmission overheating light coming on and the car will not run until it cools off. I have as of today had the transmission flushed and refilled with a new filter added. Did not...
  16. CHYAH08 Compatability

    Dodge Caliber Interior Mods, Audio, Video
    Hi All I wonder if anyone can help me solve my problem with my OEM amp in my Caliber please. I have a 2009 Dodge Caliber and I have replaced the original head until (non Sat Nav version) to a aftermarket Sony. I get power but there is no sound which I think is due to my factory amp not turning...
  17. Tail light bulb sockets won't fit

    Dodge Caliber Interior, Exterior Lighting
    I have a '07 Caliber SXT, and I purchased Spec-D black euro style tail lights #LTCAL06-JM-TM and the bulb sockets won't twist into the holes. Everywhere I look it says they fit, "easy plug-in installation," anyone else have this problem? Any suggestions besides sending them back (the site I got...
  18. Not the forums

    New Member Introductions
    Hey I'm new to the forums but I'm excited to get started and learn a bunch more knowledge about different mods to my CSRT4, as of right now all I've done is tinted the windows and put on window covers., I'm currently thinking about doing the exhaust though so if anyone has any suggestions let me...
  19. Dodge Caliber 2010 SXT Help.

    Dodge Caliber Performance Mods - Engine - SXT, SE
    Hi, Im new to this whole performance thing. I love my car and others too. I just want it to have better acceleration and better pick-up. Where do I start to make my car more powerful?
  20. Need Advice on 2009 Dodge Caliber SXT 2.0 CVT for $12,740

    Dodge Caliber General Discussion
    Hi all, I'm planning to buy a Dodge Caliber and willing to know whether the price is acceptable or not. This is a brand new 2009 Dodge Caliber SXT 2.0 CVT for $12,740 including all dealer fees except tax and tag (MSRP is 18,735) OTD (Price + tax/tag) is going to be $13,607.00 which...
Top