+ Reply to Thread
Results 1 to 7 of 7
Thread: In search for a MS1K PCM
-
03-15-2018, 11:10 PM #1
Dodge Caliber Forums Newbie
- Join Date
- Mar 2018
- Location
- Aiken, SC
- Posts
- 5
- Rep Power
- 0
In search for a MS1K PCM
So, I've had my CSRT4 for 6 years. Now that it is officially paid off, I'm looking to grab a MS1K PCM for it. I went to Realtune's site and the section said I need ordering documents from a forum site. I signed up for it and have not gotten my activation link, STILL, after over a week of waiting. Even clicked the link to have them send me another one. I sent an email to RealTune and haven't gotten anything back from them as well. Can anybody give me some sort of scoop of what may be going on? Is RealTune dead, despite their site still up? Is there any other way getting this PCM? Well I'm sure maybe finding a private seller. This is the one major thing I'm trying to go for now that I have a chance for it and it seems like there's little to possibly no hope for it. :-/
-
Sponsored Links Remove Advertisements
-
03-16-2018, 08:23 AM #2
I don't know anything about RealTune. I can only suggest you hang in there and see what happens. Does their site have a contact phone #? If so, try calling them.
Crazy can be medicated, ignorance can be educated, but you just can't fix stupid.
Charlie Patterson -
03-16-2018, 01:27 PM #3
Dodge Caliber Forums Newbie
- Join Date
- Mar 2018
- Location
- Aiken, SC
- Posts
- 5
- Rep Power
- 0
Sadly, they don't have a contact number. I'm going to assume that they use to, because they're advertising saying that they're going to get a new one. Trust me, if they had a number I would have called them. So far I got nothing back. Which kinda sucks, because I was definitely looking forward to this mod. But, I'll keep snooping around for answers.
-
Sponsored Links Remove Advertisements
-
03-17-2018, 08:34 AM #4
There's a guy on the PT forum that I'm on that does a lot of PCM stuff. I'll ask him if he has a source and get back to you. I've sent him a PM and will let you know if and when I get a reply from him. Be patient as he stays very busy.
Last edited by Flyinghigh; 03-17-2018 at 08:42 AM.
Crazy can be medicated, ignorance can be educated, but you just can't fix stupid.
Charlie Patterson -
03-18-2018, 04:19 PM #5
Dodge Caliber Forums Newbie
- Join Date
- Mar 2018
- Location
- Aiken, SC
- Posts
- 5
- Rep Power
- 0
Awesome thing to read. Please keep me updated. Very much appreciated.
-
03-19-2018, 07:48 AM #6
I have not heard back from him as of this morning. Where else have you searched? Surely there's more that Realtune out there doing this kind of work.
Have you tried B&G Performance? Here's their # 800-590-9604. Give them a call and maybe they can help you out.800.590.9604
Last edited by Flyinghigh; 03-19-2018 at 07:52 AM.
Crazy can be medicated, ignorance can be educated, but you just can't fix stupid.
Charlie Patterson -
03-19-2018, 08:30 AM #7
Dodge Caliber Forums Newbie
- Join Date
- Mar 2018
- Location
- Aiken, SC
- Posts
- 5
- Rep Power
- 0
Sadly, I think Realtune is the only place. I've searched almost everywhere. I've had my eye on this thing for some years. But couldn't afford it because, at the main time, the deal was $525. Kinda hard to cough that up when you're doing monthly payments of about that much between car payments and insurance. But now the deal is $225 for the flash. I've checked whatever other sites or whatnot that does this flash. Realtune are the ones that mainly did the flash, so other than buying someone's already flashed PCM, I don't think anyone else does it. Unless I didn't check the hole of the darkest blackest area.
-
Sponsored Links Remove Advertisements
Similar Threads
-
In search of cvt answers
By iconplayer in forum Dodge Caliber Mechanical Problems and QuestionsReplies: 1Last Post: 09-20-2014, 08:04 AM -
My search-Fu is weak
By Pharcta2 in forum Custom Dodge Caliber Interior Modifications - Audio / VideoReplies: 4Last Post: 05-12-2009, 05:37 PM -
Having Trouble Using the Search Feature?
By ShockJock in forum Off Topic DiscussionReplies: 0Last Post: 04-18-2008, 10:52 PM